Pilot - 2.5amps @ 12VDC Using standard Hydraulic Pump or Mechanical Motor.

HEADING SENSORS: Coursemaster fluxgate compass, pick off coil
INTERFACING: Standard NMEA 0183

INPUT: 2 OUTPUT: 1 ALARMS: off course, watchkeeping, system

  CM650 CONTROLLER
DIMENSIONS: 250mm x 80mm x 150mm
MOUNTING: Bracket Mount
INPUT VOLTAGE: 10-35 VDC
MOTOR DRIVE: 15A con. 20A for 2 secs.
NMEA 0183: 2 x Input 1 x output.

CM120 RUDDER FEEDBACK
DIMENSIONS: 97mm x 62mm x (Arm 145mm)
MOUNTING : Horizontal, vertical, inverted. CABLE: 9m 3 core shielded cable. CM417 FLUXGATE COMPASS
OUTPUT: Sine/Cosine (and NMEA 0183)
ACCURACY: 2 degrees RMS
ROLL/PITCH: +/- 45 degrees.
DIMENSIONS: 97mm x 55mm
CABLE: 8m 5 core shielded cable.

CM555 REMOTE CONTROL
DIMENSIONS: 140mm x 90mm x 45mm
MOUNTING: Panel
CABLE: 9m - 6 core shielded cable.

CM654 REMOTE CONTROL
DIMENSION: 155mm x 40mm
MOUNTING: Hand Held
CABLE: 9m - 6 core shielded cable.
NOTE: (25.4mm = 1 inch)

CM616 RATE GYRO
It provides a far steadier course than any autopilot
using only a fluxgate compass, and completely overcomes
any acceleration effects or magnetic field influences.
DIMENSION: 120mm x 115mm
CABLE: 8m 5 core shielded cable. DRIVE UNITS:

MECHANICAL STEERING
A state of the art 12 or 24 volt DC
printed circuit motor with integral gearbox
and electro-magnetic clutch.

CM151 MECHANICAL DRIVE
VOLTAGE: 12 VOLT DC (avail. in 24 VDC)
TYPE: Reversing, Printed Circuit
TORQUE: 12kg/cm @ 30 RPM
DIMENSION: 165mm x 160mm

HYDRAULIC STEERING - A range of
self-contained reversing electro-hydraulic pump
kits as well as continous running pump kits to
suit various size hydraulic steeering systems.

CM1212 HYDRAULIC PUMP
VOLTAGE: 12 VOLT DC (avail. in 24 VDC)
TYPE: Reversing
CAPACITY: 1.2 Ltr/Min
DIMENSION: 222mm x 120mm

CM2012 HYDRAULIC PUMP
VOLTAGE: 12 VOLT DC (avail. in 24 VDC)
TYPE: Reversing
CAPACITY: 2 Ltr/Min
DIMENSIONS: 222mm x 120mm

POWER STEERING -STANDARD SYSTEM
operates with solenoid valves when fitted to
vessels with power assisted steering. OPTIONS:
Other options are available including
heavy duty rudder feedback, rudder
angle indicators, electric wheel steering
and remote alarm.
Contact your dealer for information
on these other options.

The specifications given above are correct at the time of publication. Coursemaster reserves the right to modify specifications in the interest of improving product quality  

Please contact Coursemaster Autopilots or your local dealer to discuss drive unit selection, as vessels of the same size can vary in rudder loading. We can advise on the most suitable pilot and drive selection for your vessel. Request for Information