ENVIRONMENTAL: -10degC -
+50 degC
HEADING SENDOR: Rate gyro compass or NMEA digital
INTERFACE: NMEA 0183, 2 x inputs, 1 x output
STEERING SYSTEM TYPES: Hydraulic, mechanical, solenoid
ALARMS: Off course, watch keeping, system monitors
POWER CONSUMPTION: Standby: 300mAmps @ 12 VDC
Pilot: 2.5amps@20% duty cycle using standard hydraulic
pump
or mechanical motor
DISPLAY: Backlit LCD dot
matrix
DIMENSION: 163mm x 116mm x 30mm
MOUNTING: panel mount, optional bracket mount
CABLE: 6m
INPUT VOLTAGE: 12VDC
DIMENSIONS: 205mm x 140mm x 45mm
MOTOR DRIVE: 15Amp cont / 30Amp peak
INPUT VOLTAGE: 12-35VDC
DIMENSIONS: 205mm x 140mm x 45mm
MOTOR DRIVE: 25Amp cont / 40Amp peak
DIMENSION: 95mm x 55mm (Arm
145mm)
CABLE: 10m
ACCURACY: 2 degrees RMS
ROLL/PITCH: +/- 35 degrees
DIMENSIONs: 95mm x 55mm
CABLE: 8m
Hand-held, jog lever, or
electric wheel steering
HYDRAULIC DRIVES: Reversing
0.6L, 1L, 2L
Continuous Running: 2L, 4L
LINEAR DRIVES: Hydraulic, 200-300mm stroke
ROTARY DRIVE: Reversing, printed circuit reversing,
sprocket drive
electromagnetic clutch, torque 120kg/cm @ 30 rpm
SOLENOID DRIVE: Connection to hydraulic solenoids
The specifications above are correct at time of
publication, however, Coursemaster reserves the
right to modify specifications in the interest of
improving product quality.
Please
contact Coursemaster Autopilots or your
local dealer to discuss drive unit selection,
as vessels of the same size can vary in
rudder loading. We can advise on the most
suitable pilot and drive selection for your
vessel. Request
for Information |
