ENVIRONMENTAL: -10degC
- +50degC
HEADING SENSOR: Rate gyro compass or NMEA digital
INTERFACE: NMEA 0183, 2 x inputs, 1 x output
STEERING SYSTEM TYPES: Hydraulic, Mechanical,
Solenoid
ALARMS: Off course, watch keeping, system monitor
POWER CONSUMPTION:
Standby: 300mAmps @ 12 VDC
Pilot: 2.5 amps@ 20% duty cycle using standard
hydraulic pump
or mechanical motor
DIMENSION: 110mm
x 110mm x 50mm
DISPLAY: Backlit LCD
MOUNTING: Panel mount
CABLE: 6m
INPUT VOLTAGE: 12VDC
DIMENSIONS: 205mm x 140mm x 45mm
MOTOR DRIVE: 15 amp cont / 30 amp peak
INPUT VOLTAGE: 12-35VDC
DIMENSIONS: 270mm x 140mm x 45mm
MOTOR DRIVE: 25 amp cont / 40 amp peak
DIMENSION: 95mm x 55mm
(Arm 145mm)
CABLE: 10m
ACCURACY: 2 degrees RMS
ROLL/PITCH: +/- 35 degrees.
DIMENSIONs: 95mm x 55mm
CABLE: 8m
Hand-held, jog
lever, or electric wheel steering
HYDRAULIC DRIVES:
Reversing 0.6L, 1L, 2L
Continuous running 2L, 4L
LINEAR DRIVES: Hydraulic, 200-300mm stroke
ROTARY DRIVE: Reversing motor with sproket drive,
electromagnetic clutch
torque 120kg/cm @ 30 rpm
SOLENOID DRIVE: Connection to hydraulic solenoids
The specifications above are correct at the time
of publication. Coursemaster Autopilots reserves
the right to modify specifications in the interest
of improving product quality.
Please
contact Coursemaster Autopilots or your
local dealer to discuss drive unit selection,
as vessels of the same size can vary in
rudder loading. We can advise on the most
suitable pilot and drive selection for
your vessel. size=-1> Request
for Information |
